Contents

PositionSource QML Type

The PositionSource type provides the device's current position. More...

Import Statement: import QtPositioning 5.15
Since: Qt 5.2

Properties

Signals

Methods

Detailed Description

The PositionSource type provides information about the user device's current position. The position is available as a Position type, which contains all the standard parameters typically available from GPS and other similar systems, including longitude, latitude, speed and accuracy details.

As different position sources are available on different platforms and devices, these are categorized by their basic type (Satellite, NonSatellite, and AllPositioningMethods). The available methods for the current platform can be enumerated in the supportedPositioningMethods property.

To indicate which methods are suitable for your application, set the preferredPositioningMethods property. If the preferred methods are not available, the default source of location data for the platform will be chosen instead. If no default source is available (because none are installed for the runtime platform, or because it is disabled), the valid property will be set to false.

The updateInterval property can then be used to indicate how often your application wishes to receive position updates. The start(), stop() and update() methods can be used to control the operation of the PositionSource, as well as the active property, which when set is equivalent to calling start() or stop().

When the PositionSource is active, position updates can be retrieved either by simply using the position property in a binding (as the value of another item's property), or by providing an implementation of the onPositionChanged signal-handler.

Example Usage

The following example shows a simple PositionSource used to receive updates every second and print the longitude and latitude out to the console.

 PositionSource {
     id: src
     updateInterval: 1000
     active: true

     onPositionChanged: {
         var coord = src.position.coordinate;
         console.log("Coordinate:", coord.longitude, coord.latitude);
     }
 }

The GeoFlickr example application shows how to use a PositionSource in your application to retrieve local data for users from a REST web service.

See also QtPositioning::Position, QGeoPositionInfoSource, and PluginParameter.

Property Documentation

active : bool

This property indicates whether the position source is active. Setting this property to false equals calling stop, and setting this property true equals calling start.

See also start, stop, and update.


name : string

This property holds the unique internal name for the plugin currently providing position information.

Setting the property causes the PositionSource to use a particular positioning provider. If the PositionSource is active at the time that the name property is changed, it will become inactive. If the specified positioning provider cannot be loaded the position source will become invalid.

Changing the name property may cause the updateInterval, supportedPositioningMethods and preferredPositioningMethods properties to change as well.


nmeaSource : url

This property holds the source for NMEA (National Marine Electronics Association) position-specification data (file). One purpose of this property is to be of development convenience.

Setting this property will override any other position source. Currently only files local to the .qml -file are supported. The NMEA source is created in simulation mode, meaning that the data and time information in the NMEA source data is used to provide positional updates at the rate at which the data was originally recorded.

If nmeaSource has been set for a PositionSource object, there is no way to revert back to non-file sources.


[default] parameters : list<PluginParameter>

This property holds the list of plugin parameters.

This property was introduced in QtPositioning 5.14.


position : Position

This property holds the last known positional data. It is a read-only property.

The Position type has different positional member variables, whose validity can be checked with appropriate validity functions (for example sometimes an update does not have speed or altitude data).

However, whenever a positionChanged signal has been received, at least position::coordinate::latitude, position::coordinate::longitude, and position::timestamp can be assumed to be valid.

See also start, stop, and update.


preferredPositioningMethods : enumeration

This property holds the preferred positioning methods of the current source.

  • PositionSource.NoPositioningMethods - No positioning method is preferred.
  • PositionSource.SatellitePositioningMethods - Satellite-based positioning methods such as GPS should be preferred.
  • PositionSource.NonSatellitePositioningMethods - Non-satellite-based methods should be preferred.
  • PositionSource.AllPositioningMethods - Any positioning methods are acceptable.

sourceError : enumeration

This property holds the error which last occurred with the PositionSource.

  • PositionSource.AccessError - The connection setup to the remote positioning backend failed because the application lacked the required privileges.
  • PositionSource.ClosedError - The positioning backend closed the connection, which happens for example in case the user is switching location services to off. As soon as the location service is re-enabled regular updates will resume.
  • PositionSource.NoError - No error has occurred.
  • PositionSource.UnknownSourceError - An unidentified error occurred.
  • PositionSource.SocketError - An error occurred while connecting to an nmea source using a socket.

supportedPositioningMethods : enumeration

This property holds the supported positioning methods of the current source.

  • PositionSource.NoPositioningMethods - No positioning methods supported (no source).
  • PositionSource.SatellitePositioningMethods - Satellite-based positioning methods such as GPS are supported.
  • PositionSource.NonSatellitePositioningMethods - Non-satellite-based methods are supported.
  • PositionSource.AllPositioningMethods - Both satellite-based and non-satellite positioning methods are supported.

updateInterval : int

This property holds the desired interval between updates (milliseconds).

See also QGeoPositionInfoSource::updateInterval().


valid : bool

This property is true if the PositionSource object has acquired a valid backend plugin to provide data. If false, other methods on the PositionSource will have no effect.

Applications should check this property to determine whether positioning is available and enabled on the runtime platform, and react accordingly.


Signal Documentation

updateTimeout()

If update() was called, this signal is emitted if the current position could not be retrieved within a certain amount of time.

If start() was called, this signal is emitted if the position engine determines that it is not able to provide further regular updates.

Note: The corresponding handler is onUpdateTimeout.

This signal was introduced in Qt Positioning 5.5.

See also QGeoPositionInfoSource::updateTimeout().


Method Documentation

Variant backendProperty(string name)

Returns the value of the backend-specific property named name, if present. Otherwise, including if called on an uninitialized PositionSource, the return value will be invalid. Supported backend-specific properties are listed and described in Qt Positioning plugins#Default plugins.

This method was introduced in Qt Positioning 5.14.

See also backendProperty and QGeoPositionInfoSource::setBackendProperty.


bool setBackendProperty(string name, Variant value)

Sets the backend-specific property named name to value. Returns true on success, false otherwise, including if called on an uninitialized PositionSource. Supported backend-specific properties are listed and described in Qt Positioning plugins#Default plugins.

This method was introduced in Qt Positioning 5.14.

See also backendProperty and QGeoPositionInfoSource::setBackendProperty.


start()

Requests updates from the location source. Uses updateInterval if set, default interval otherwise. If there is no source available, this method has no effect.

See also stop, update, and active.


stop()

Stops updates from the location source. If there is no source available or it is not active, this method has no effect.

See also start, update, and active.


update()

A convenience method to request single update from the location source. If there is no source available, this method has no effect.

If the position source is not active, it will be activated for as long as it takes to receive an update, or until the request times out. The request timeout period is source-specific.

See also start, stop, and active.


© 2020 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners.
The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation.
Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.