Item QML Type

A basic visual QML type. More...

Properties

Methods

Detailed Description

The Item type is the base type for all visual items in Qt Quick.

All visual items in Qt Quick inherit from Item. Although an Item object has no visual appearance, it defines all the attributes that are common across visual items, such as x and y position, width and height, anchoring and key handling support.

The Item type can be useful for grouping several items under a single root visual item. For example:

 import QtQuick 2.0

 Item {
     Image {
         source: "tile.png"
     }
     Image {
         x: 80
         width: 100
         height: 100
         source: "tile.png"
     }
     Image {
         x: 190
         width: 100
         height: 100
         fillMode: Image.Tile
         source: "tile.png"
     }
 }

Key Handling

Key handling is available to all Item-based visual types via the Keys attached property. The Keys attached property provides basic signals such as pressed and released, as well as signals for specific keys, such as spacePressed. The example below assigns keyboard focus to the item and handles the left key via the general onPressed handler and the return key via the onReturnPressed handler:

 import QtQuick 2.0

 Item {
     focus: true
     Keys.onPressed: {
         if (event.key == Qt.Key_Left) {
             console.log("move left");
             event.accepted = true;
         }
     }
     Keys.onReturnPressed: console.log("Pressed return");
 }

See the Keys attached property for detailed documentation.

Layout Mirroring

Item layouts can be mirrored using the LayoutMirroring attached property. This causes anchors to be horizontally reversed, and also causes items that lay out or position their children (such as ListView or Row) to horizontally reverse the direction of their layouts.

See LayoutMirroring for more details.

Item Layers

An Item will normally be rendered directly into the window it belongs to. However, by setting layer.enabled, it is possible to delegate the item and its entire subtree into an offscreen surface. Only the offscreen surface, a texture, will be then drawn into the window.

If it is desired to have a texture size different from that of the item, this is possible using layer.textureSize. To render only a section of the item into the texture, use layer.sourceRect. It is also possible to specify layer.sourceRect so it extends beyond the bounds of the item. In this case, the exterior will be padded with transparent pixels.

The item will use linear interpolation for scaling if layer.smooth is set to true and will use mipmap for downsampling if layer.mipmap is set to true. Mipmapping may improve visual quality of downscaled items. For mipmapping of single Image items, prefer Image::mipmap.

Layer Opacity vs Item Opacity

When applying opacity to an item hierarchy the opacity is applied to each item individually. This can lead to undesired visual results when the opacity is applied to a subtree. Consider the following example:

Non-layered Opacity
 Item {
     id: nonLayered

     opacity: 0.5

     width: 100
     height: 100

     Rectangle { width: 80; height: 80; border.width: 1 }
     Rectangle { x: 20; y: 20; width: 80; height: 80; border.width: 1 }
 }

A layer is rendered with the root item's opacity being 1, and then the root item's opacity is applied to the texture when it is drawn. This means that fading in a large item hierarchy from transparent to opaque, or vice versa, can be done without the overlap artifacts that the normal item by item alpha blending has. Here is the same example with layer enabled:

Layered Opacity
 Item {
     id: layered

     opacity: 0.5

     layer.enabled: true

     width: 100
     height: 100

     Rectangle { width: 80; height: 80; border.width: 1 }
     Rectangle { x: 20; y: 20; width: 80; height: 80; border.width: 1 }
 }

Combined with ShaderEffects

Setting layer.enabled to true will turn the item into a texture provider, making it possible to use the item directly as a texture, for instance in combination with the ShaderEffect type.

It is possible to apply an effect on a layer at runtime using layer.effect:

 Item {
     id: layerRoot
     layer.enabled: true
     layer.effect: ShaderEffect {
         fragmentShader: "
             uniform lowp sampler2D source; // this item
             uniform lowp float qt_Opacity; // inherited opacity of this item
             varying highp vec2 qt_TexCoord0;
             void main() {
                 lowp vec4 p = texture2D(source, qt_TexCoord0);
                 lowp float g = dot(p.xyz, vec3(0.344, 0.5, 0.156));
                 gl_FragColor = vec4(g, g, g, p.a) * qt_Opacity;
             }"
     }

In this example, we implement the shader effect manually. The Qt Graphical Effects module contains a suite of ready-made effects for use with Qt Quick.

See ShaderEffect for more information about using effects.

Note: layer.enabled is actually just a more convenient way of using ShaderEffectSource.

Memory and Performance

When an item's layer is enabled, the scene graph will allocate memory in the GPU equal to width x height x 4. In memory constrained configurations, large layers should be used with care.

In the QPainter / QWidget world, it is sometimes favorable to cache complex content in a pixmap, image or texture. In Qt Quick, because of the techniques already applied by the scene graph renderer, this will in most cases not be the case. Excessive draw calls are already reduced because of batching and a cache will in most cases end up blending more pixels than the original content. The overhead of rendering to an offscreen and the blending involved with drawing the resulting texture is therefore often more costly than simply letting the item and its children be drawn normally.

Also, an item using a layer can not be batched during rendering. This means that a scene with many layered items may have performance problems.

Layering can be convenient and useful for visual effects, but should in most cases be enabled for the duration of the effect and disabled afterwards.

Property Documentation

implicitHeight : real

implicitWidth : real

Defines the natural width or height of the Item if no width or height is specified.

The default implicit size for most items is 0x0, however some items have an inherent implicit size which cannot be overridden, for example, Image and Text.

Setting the implicit size is useful for defining components that have a preferred size based on their content, for example:

 // Label.qml
 import QtQuick 2.0

 Item {
     property alias icon: image.source
     property alias label: text.text
     implicitWidth: text.implicitWidth + image.implicitWidth
     implicitHeight: Math.max(text.implicitHeight, image.implicitHeight)
     Image { id: image }
     Text {
         id: text
         wrapMode: Text.Wrap
         anchors.left: image.right; anchors.right: parent.right
         anchors.verticalCenter: parent.verticalCenter
     }
 }

Note: Using implicitWidth of Text or TextEdit and setting the width explicitly incurs a performance penalty as the text must be laid out twice.


height : real

width : real

x : real

y : real

Defines the item's position and size. The default value is 0.

The (x,y) position is relative to the parent.

 Item { x: 100; y: 100; width: 100; height: 100 }

children : list<Item>

resources : list<Object>

The children property contains the list of visual children of this item. The resources property contains non-visual resources that you want to reference by name.

It is not generally necessary to refer to these properties when adding child items or resources, as the default data property will automatically assign child objects to the children and resources properties as appropriate. See the data documentation for details.


activeFocus : bool

This read-only property indicates whether the item has active focus.

If activeFocus is true, either this item is the one that currently receives keyboard input, or it is a FocusScope ancestor of the item that currently receives keyboard input.

Usually, activeFocus is gained by setting focus on an item and its enclosing FocusScope objects. In the following example, the input and focusScope objects will have active focus, while the root rectangle object will not.

 import QtQuick 2.0

 Rectangle {
     width: 100; height: 100

     FocusScope {
         id: focusScope
         focus: true

         TextInput {
             id: input
             focus: true
         }
     }
 }

See also focus and Keyboard Focus in Qt Quick.


activeFocusOnTab : bool

This property holds whether the item wants to be in the tab focus chain. By default, this is set to false.

The tab focus chain traverses elements by first visiting the parent, and then its children in the order they occur in the children property. Pressing the tab key on an item in the tab focus chain will move keyboard focus to the next item in the chain. Pressing BackTab (normally Shift+Tab) will move focus to the previous item.

To set up a manual tab focus chain, see KeyNavigation. Tab key events used by Keys or KeyNavigation have precedence over focus chain behavior; ignore the events in other key handlers to allow it to propagate.


anchors group

anchors.alignWhenCentered : bool

anchors.baseline : AnchorLine

anchors.baselineOffset : real

anchors.bottom : AnchorLine

anchors.bottomMargin : real

anchors.centerIn : Item

anchors.fill : Item

anchors.horizontalCenter : AnchorLine

anchors.horizontalCenterOffset : real

anchors.left : AnchorLine

anchors.leftMargin : real

anchors.margins : real

anchors.right : AnchorLine

anchors.rightMargin : real

anchors.top : AnchorLine

anchors.topMargin : real

anchors.verticalCenter : AnchorLine

anchors.verticalCenterOffset : real

Anchors provide a way to position an item by specifying its relationship with other items.

Margins apply to top, bottom, left, right, and fill anchors. The anchors.margins property can be used to set all of the various margins at once, to the same value. It will not override a specific margin that has been previously set; to clear an explicit margin set its value to undefined. Note that margins are anchor-specific and are not applied if an item does not use anchors.

Offsets apply for horizontal center, vertical center, and baseline anchors.

Text anchored to Image, horizontally centered and vertically below, with a margin.
 Item {
     Image {
         id: pic
         // ...
     }
     Text {
         id: label
         anchors.horizontalCenter: pic.horizontalCenter
         anchors.top: pic.bottom
         anchors.topMargin: 5
         // ...
     }
 }

Left of Text anchored to right of Image, with a margin. The y property of both defaults to 0.
 Item {
     Image {
         id: pic
         // ...
     }
     Text {
         id: label
         anchors.left: pic.right
         anchors.leftMargin: 5
         // ...
     }
 }

anchors.fill provides a convenient way for one item to have the same geometry as another item, and is equivalent to connecting all four directional anchors.

To clear an anchor value, set it to undefined.

anchors.alignWhenCentered (default true) forces centered anchors to align to a whole pixel; if the item being centered has an odd width or height, the item will be positioned on a whole pixel rather than being placed on a half-pixel. This ensures the item is painted crisply. There are cases where this is not desirable, for example when rotating the item jitters may be apparent as the center is rounded.

Note: You can only anchor an item to siblings or a parent.

For more information see Anchor Layouts.


antialiasing : bool

Used by visual elements to decide if the item should use antialiasing or not. In some cases items with antialiasing require more memory and are potentially slower to render (see Antialiasing for more details).

The default is false, but may be overridden by derived elements.


baselineOffset : int

Specifies the position of the item's baseline in local coordinates.

The baseline of a Text item is the imaginary line on which the text sits. Controls containing text usually set their baseline to the baseline of their text.

For non-text items, a default baseline offset of 0 is used.


childrenRect group

[read-only] childrenRect.height : real

[read-only] childrenRect.width : real

[read-only] childrenRect.x : real

[read-only] childrenRect.y : real

This read-only property holds the collective position and size of the item's children.

This property is useful if you need to access the collective geometry of an item's children in order to correctly size the item.


clip : bool

This property holds whether clipping is enabled. The default clip value is false.

If clipping is enabled, an item will clip its own painting, as well as the painting of its children, to its bounding rectangle.


containmentMask : QObject*

This property holds an optional mask for the Item to be used in the QtQuick::Item::contains method. QtQuick::Item::contains main use is currently to determine whether an input event has landed into the item or not.

By default the contains method will return true for any point within the Item's bounding box. containmentMask allows for a more fine-grained control. For example, the developer could define and use an AnotherItem element as containmentMask, which has a specialized contains method, like:

 Item { id: item; containmentMask: AnotherItem { id: anotherItem } }

item's contains method would then return true only if anotherItem's contains implementation returns true.

This property was introduced in Qt 5.11.


[default] data : list<Object>

The data property allows you to freely mix visual children and resources in an item. If you assign a visual item to the data list it becomes a child and if you assign any other object type, it is added as a resource.

So you can write:

 Item {
     Text {}
     Rectangle {}
     Timer {}
 }

instead of:

 Item {
     children: [
         Text {},
         Rectangle {}
     ]
     resources: [
         Timer {}
     ]
 }

It should not generally be necessary to refer to the data property, as it is the default property for Item and thus all child items are automatically assigned to this property.


enabled : bool

This property holds whether the item receives mouse and keyboard events. By default this is true.

Setting this property directly affects the enabled value of child items. When set to false, the enabled values of all child items also become false. When set to true, the enabled values of child items are returned to true, unless they have explicitly been set to false.

Setting this property to false automatically causes activeFocus to be set to false, and this item will no longer receive keyboard events.

See also visible.


focus : bool

This property holds whether the item has focus within the enclosing FocusScope. If true, this item will gain active focus when the enclosing FocusScope gains active focus.

In the following example, input will be given active focus when scope gains active focus:

 import QtQuick 2.0

 Rectangle {
     width: 100; height: 100

     FocusScope {
         id: scope

         TextInput {
             id: input
             focus: true
         }
     }
 }

For the purposes of this property, the scene as a whole is assumed to act like a focus scope. On a practical level, that means the following QML will give active focus to input on startup.

 Rectangle {
     width: 100; height: 100

     TextInput {
           id: input
           focus: true
     }
 }

See also activeFocus and Keyboard Focus in Qt Quick.


layer.effect : Component

Holds the effect that is applied to this layer.

The effect is typically a ShaderEffect component, although any Item component can be assigned. The effect should have a source texture property with a name matching layer.samplerName.

See also layer.samplerName and Item Layers.


layer.enabled : bool

Holds whether the item is layered or not. Layering is disabled by default.

A layered item is rendered into an offscreen surface and cached until it is changed. Enabling layering for complex QML item hierarchies can sometimes be an optimization.

None of the other layer properties have any effect when the layer is disabled.

See also Item Layers.


layer.format : enumeration

This property defines the internal OpenGL format of the texture. Modifying this property makes most sense when the layer.effect is also specified. Depending on the OpenGL implementation, this property might allow you to save some texture memory.

Note: ShaderEffectSource.RGB and ShaderEffectSource.Alpha should be used with caution, as support for these formats in the underlying hardware and driver is often not present.

See also Item Layers.


layer.mipmap : bool

If this property is true, mipmaps are generated for the texture.

Note: Some OpenGL ES 2 implementations do not support mipmapping of non-power-of-two textures.

See also Item Layers.


layer.samplerName : string

Holds the name of the effect's source texture property.

This value must match the name of the effect's source texture property so that the Item can pass the layer's offscreen surface to the effect correctly.

See also layer.effect, ShaderEffect, and Item Layers.


layer.samples : enumeration

This property allows requesting multisampled rendering in the layer.

By default multisampling is enabled whenever multisampling is enabled for the entire window, assuming the scenegraph renderer in use and the underlying graphics API supports this.

By setting the value to 2, 4, etc. multisampled rendering can be requested for a part of the scene without enabling multisampling for the entire scene. This way multisampling is applied only to a given subtree, which can lead to significant performance gains since multisampling is not applied to other parts of the scene.

Note: Enabling multisampling can be potentially expensive regardless of the layer's size, as it incurs a hardware and driver dependent performance and memory cost.

Note: This property is only functional when support for multisample renderbuffers and framebuffer blits is available. Otherwise the value is silently ignored.

This property was introduced in Qt 5.10.


layer.smooth : bool

Holds whether the layer is smoothly transformed. When enabled, sampling the layer's texture is performed using linear interpolation, while non-smooth results in using the nearest filtering mode.

By default, this property is set to false.

See also Item Layers.


layer.sourceRect : rect

This property defines the rectangular area of the item that should be rendered into the texture. The source rectangle can be larger than the item itself. If the rectangle is null, which is the default, then the whole item is rendered to the texture.

See also Item Layers.


layer.textureMirroring : enumeration

This property defines how the generated OpenGL texture should be mirrored. The default value is ShaderEffectSource.MirrorVertically. Custom mirroring can be useful if the generated texture is directly accessed by custom shaders, such as those specified by ShaderEffect. If no effect is specified for the layered item, mirroring has no effect on the UI representation of the item.

This property was introduced in Qt 5.6.


layer.textureSize : size

This property holds the requested pixel size of the layers texture. If it is empty, which is the default, the size of the item is used.

Note: Some platforms have a limit on how small framebuffer objects can be, which means the actual texture size might be larger than the requested size.

See also Item Layers.


layer.wrapMode : enumeration

This property defines the OpenGL wrap modes associated with the texture. Modifying this property makes most sense when the layer.effect is specified.

Note: Some OpenGL ES 2 implementations do not support the GL_REPEAT wrap mode with non-power-of-two textures.

See also Item Layers.


opacity : real

This property holds the opacity of the item. Opacity is specified as a number between 0.0 (fully transparent) and 1.0 (fully opaque). The default value is 1.0.

When this property is set, the specified opacity is also applied individually to child items. This may have an unintended effect in some circumstances. For example in the second set of rectangles below, the red rectangle has specified an opacity of 0.5, which affects the opacity of its blue child rectangle even though the child has not specified an opacity.

 Item {
     Rectangle {
         color: "red"
         width: 100; height: 100
         Rectangle {
             color: "blue"
             x: 50; y: 50; width: 100; height: 100
         }
     }
 }

 Item {
     Rectangle {
         opacity: 0.5
         color: "red"
         width: 100; height: 100
         Rectangle {
             color: "blue"
             x: 50; y: 50; width: 100; height: 100
         }
     }
 }

Changing an item's opacity does not affect whether the item receives user input events. (In contrast, setting visible property to false stops mouse events, and setting the enabled property to false stops mouse and keyboard events, and also removes active focus from the item.)

See also visible.


parent : Item

This property holds the visual parent of the item.

Note: The concept of the visual parent differs from that of the QObject parent. An item's visual parent may not necessarily be the same as its object parent. See Concepts - Visual Parent in Qt Quick for more details.


rotation : real

This property holds the rotation of the item in degrees clockwise around its transformOrigin.

The default value is 0 degrees (that is, no rotation).

 Rectangle {
     color: "blue"
     width: 100; height: 100
     Rectangle {
         color: "red"
         x: 25; y: 25; width: 50; height: 50
         rotation: 30
     }
 }

See also Transform and Rotation.


scale : real

This property holds the scale factor for this item.

A scale of less than 1.0 causes the item to be rendered at a smaller size, and a scale greater than 1.0 renders the item at a larger size. A negative scale causes the item to be mirrored when rendered.

The default value is 1.0.

Scaling is applied from the transformOrigin.

 import QtQuick 2.0

 Rectangle {
     color: "blue"
     width: 100; height: 100

     Rectangle {
         color: "green"
         width: 25; height: 25
     }

     Rectangle {
         color: "red"
         x: 25; y: 25; width: 50; height: 50
         scale: 1.4
         transformOrigin: Item.TopLeft
     }
 }

See also Transform and Scale.


smooth : bool

Primarily used in image based items to decide if the item should use smooth sampling or not. Smooth sampling is performed using linear interpolation, while non-smooth is performed using nearest neighbor.

In Qt Quick 2.0, this property has minimal impact on performance.

By default, this property is set to true.


state : string

This property holds the name of the current state of the item.

If the item is in its default state, that is, no explicit state has been set, then this property holds an empty string. Likewise, you can return an item to its default state by setting this property to an empty string.

See also Qt Quick States.


states : list<State>

This property holds the list of possible states for this item. To change the state of this item, set the state property to one of these states, or set the state property to an empty string to revert the item to its default state.

This property is specified as a list of State objects. For example, below is an item with "red_color" and "blue_color" states:

 import QtQuick 2.0

 Rectangle {
     id: root
     width: 100; height: 100

     states: [
         State {
             name: "red_color"
             PropertyChanges { target: root; color: "red" }
         },
         State {
             name: "blue_color"
             PropertyChanges { target: root; color: "blue" }
         }
     ]
 }

See Qt Quick States and Animation and Transitions in Qt Quick for more details on using states and transitions.

See also transitions.


transform : list<Transform>

This property holds the list of transformations to apply.

For more information see Transform.


transformOrigin : enumeration

This property holds the origin point around which scale and rotation transform.

Nine transform origins are available, as shown in the image below. The default transform origin is Item.Center.

This example rotates an image around its bottom-right corner.

 Image {
     source: "myimage.png"
     transformOrigin: Item.BottomRight
     rotation: 45
 }

To set an arbitrary transform origin point use the Scale or Rotation transform types with transform.


transitions : list<Transition>

This property holds the list of transitions for this item. These define the transitions to be applied to the item whenever it changes its state.

This property is specified as a list of Transition objects. For example:

 import QtQuick 2.0

 Item {
     transitions: [
         Transition {
             //...
         },
         Transition {
             //...
         }
     ]
 }

See Qt Quick States and Animation and Transitions in Qt Quick for more details on using states and transitions.

See also states.


visible : bool

This property holds whether the item is visible. By default this is true.

Setting this property directly affects the visible value of child items. When set to false, the visible values of all child items also become false. When set to true, the visible values of child items are returned to true, unless they have explicitly been set to false.

(Because of this flow-on behavior, using the visible property may not have the intended effect if a property binding should only respond to explicit property changes. In such cases it may be better to use the opacity property instead.)

If this property is set to false, the item will no longer receive mouse events, but will continue to receive key events and will retain the keyboard focus if it has been set. (In contrast, setting the enabled property to false stops both mouse and keyboard events, and also removes focus from the item.)

Note: This property's value is only affected by changes to this property or the parent's visible property. It does not change, for example, if this item moves off-screen, or if the opacity changes to 0.

See also opacity and enabled.


visibleChildren : list<Item>

This read-only property lists all of the item's children that are currently visible. Note that a child's visibility may have changed explicitly, or because the visibility of this (it's parent) item or another grandparent changed.


z : real

Sets the stacking order of sibling items. By default the stacking order is 0.

Items with a higher stacking value are drawn on top of siblings with a lower stacking order. Items with the same stacking value are drawn bottom up in the order they appear. Items with a negative stacking value are drawn under their parent's content.

The following example shows the various effects of stacking order.

Same z - later children above earlier children:
 Item {
     Rectangle {
         color: "red"
         width: 100; height: 100
     }
     Rectangle {
         color: "blue"
         x: 50; y: 50; width: 100; height: 100
     }
 }

Higher z on top:
 Item {
     Rectangle {
         z: 1
         color: "red"
         width: 100; height: 100
     }
     Rectangle {
         color: "blue"
         x: 50; y: 50; width: 100; height: 100
     }
 }

Same z - children above parents:
 Item {
     Rectangle {
         color: "red"
         width: 100; height: 100
         Rectangle {
             color: "blue"
             x: 50; y: 50; width: 100; height: 100
         }
     }
 }

Lower z below:
 Item {
     Rectangle {
         color: "red"
         width: 100; height: 100
         Rectangle {
             z: -1
             color: "blue"
             x: 50; y: 50; width: 100; height: 100
         }
     }
 }

Method Documentation

object mapToItem(Item item, point p)

object mapToItem(Item item, real x, real y)

object mapToItem(Item item, real x, real y, real width, real height)

object mapToItem(Item item, rect r)

Maps the point (x, y) or rect (x, y, width, height), which is in this item's coordinate system, to item's coordinate system, and returns a point or rect matching the mapped coordinate.

The following properties of the item are used in the mapping: x, y, scale, rotation, transformOrigin, and transform.

If item is a null value, this maps the point or rect to the coordinate system of the root QML view.

The versions accepting point and rect are since Qt 5.15.


object mapFromItem(Item item, point p)

object mapFromItem(Item item, real x, real y)

object mapFromItem(Item item, real x, real y, real width, real height)

object mapFromItem(Item item, rect r)

Maps the point (x, y) or rect (x, y, width, height), which is in item's coordinate system, to this item's coordinate system, and returns a point or rect matching the mapped coordinate.

The following properties of the item are used in the mapping: x, y, scale, rotation, transformOrigin, and transform.

If item is a null value, this maps the point or rect from the coordinate system of the root QML view.

The versions accepting point and rect are since Qt 5.15.


childAt(real x, real y)

Returns the first visible child item found at point (x, y) within the coordinate system of this item.

Returns null if there is no such item.


bool contains(point point)

Returns true if this item contains point, which is in local coordinates; returns false otherwise.


forceActiveFocus(Qt::FocusReason reason)

This is an overloaded function.

Forces active focus on the item with the given reason.

This method sets focus on the item and ensures that all ancestor FocusScope objects in the object hierarchy are also given focus.

This method was introduced in Qt 5.1.

See also activeFocus and Qt::FocusReason.


forceActiveFocus()

Forces active focus on the item.

This method sets focus on the item and ensures that all ancestor FocusScope objects in the object hierarchy are also given focus.

The reason for the focus change will be Qt::OtherFocusReason. Use the overloaded method to specify the focus reason to enable better handling of the focus change.

See also activeFocus.


bool grabToImage(callback, targetSize)

Grabs the item into an in-memory image.

The grab happens asynchronously and the JavaScript function callback is invoked when the grab is completed. The callback takes one argument, which is the result of the grab operation; an ItemGrabResult object.

Use targetSize to specify the size of the target image. By default, the result will have the same size as the item.

If the grab could not be initiated, the function returns false.

The following snippet shows how to grab an item and store the results to a file.

 Rectangle {
     id: source
     width: 100
     height: 100
     gradient: Gradient {
         GradientStop { position: 0; color: "steelblue" }
         GradientStop { position: 1; color: "black" }
     }
 }
     // ...
     source.grabToImage(function(result) {
                            result.saveToFile("something.png");
                        });

The following snippet shows how to grab an item and use the results in another image element.

 Image {
     id: image
 }
     // ...
     source.grabToImage(function(result) {
                            image.source = result.url;
                        },
                        Qt.size(50, 50));

Note: This function will render the item to an offscreen surface and copy that surface from the GPU's memory into the CPU's memory, which can be quite costly. For "live" preview, use layers or ShaderEffectSource.


object mapFromGlobal(real x, real y)

Maps the point (x, y), which is in the global coordinate system, to the item's coordinate system, and returns a point matching the mapped coordinate.

The following properties of the item are used in the mapping: x, y, scale, rotation, transformOrigin, and transform.

This method was introduced in Qt 5.7.


object mapToGlobal(real x, real y)

Maps the point (x, y), which is in this item's coordinate system, to the global coordinate system, and returns a point matching the mapped coordinate.

The following properties of the item are used in the mapping: x, y, scale, rotation, transformOrigin, and transform.

This method was introduced in Qt 5.7.


nextItemInFocusChain(bool forward)

Returns the item in the focus chain which is next to this item. If forward is true, or not supplied, it is the next item in the forwards direction. If forward is false, it is the next item in the backwards direction.

This method was introduced in Qt 5.1.